ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: wezzlegod on November 15, 2007, 08:10:51 PM
-
ok im slowly working to the axle swap just a small up date hear . my body mounts where getting munched by the rock so i decided to move them up to the level of the body. it has a 3 inch lift so i cut them off the frame and welded them to a plate and then welded the plate to the frame. well hears pix. im going to be starting on the link supports this weekend. for those that haven't been following and don't know what the zuktoy is search for zuketoy you will get the whole thing.
-
That looks alot better than what you had, the only thing I would do diffrent is to make the plates welded to the frame more of a diamond shape, I never liked welding streight right angle plates on a frame, I have to do the same thing soon on my sammie for the shock mounts, been putting it off!
-
Yes what fuel said. I have ripped off my larger/higher mounts also. I now have a crossbar to tie the two together. It works better.
Kevin