ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: brawnyrebel on November 23, 2007, 03:46:28 PM

Title: u bolts
Post by: brawnyrebel on November 23, 2007, 03:46:28 PM

 What kind of u bolts are you diy spoa guys using on the samurais? The last time i did one i broke a few of the stock ones and had to use some generic tractor supply ones. They just were not compleatly right. Is there any tricks?

Title: Re: u bolts
Post by: kingzoo on November 23, 2007, 04:20:30 PM

   I get mine at napa,and I use grade 8 u bolts.tell them that the u bolts are for leaf springs,and what for.

Title: Re: u bolts
Post by: brawnyrebel on November 23, 2007, 07:21:04 PM

Do they give you two different sizes for te front ones?

Title: Re: u bolts
Post by: Drone637 on November 24, 2007, 01:20:55 AM

I run stock U-Bolts on the front.  on the rear I sleeved the axle with a thicker tube and picked up a set of custom U-Bolts to fit.  Then built a new pad to bolt themt o.