ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: thedom on November 30, 2007, 11:25:09 PM

Title: ok, i want to put toyota parts on a zuki
Post by: thedom on November 30, 2007, 11:25:09 PM

ok say i have the front ifs outa a 87 toyota truck, can i put it in a 95 zuki?  i have everything, so i was just wanting to know if anyone has done this.  im not scared of fabing shit up so let me know what you did to make this happen.

Title: Re: ok, i want to put toyota parts on a zuki
Post by: sidekicksrock on December 01, 2007, 07:15:54 AM

Yes it has been done, Both with and without the axle housing. If you use the housing you will have to A, match the front R&P to the rear or B, match the rear R&P to the front. If you use just the CV's and hubs there is tons of info on this site. Use the search function here, Stan37 did the original swap and has developed a kit which he sells. You can also checkout this thread over on Zuwharrie: http://bbs.zuwharrie.com/content/topic,52575.0.html