ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: MiniFJ on December 20, 2007, 04:35:11 PM

Title: Weber Carb Setup Question
Post by: MiniFJ on December 20, 2007, 04:35:11 PM

I'm running a Weber 32/36 on my bone stock 1.3. I'm wondering what jet combo should I be running with this setup and if anyone has anymore info on getting it dialed in????

Title: Re: Weber Carb Setup Question
Post by: ack on December 21, 2007, 04:26:24 AM

Quote from: MiniFJ on December 20, 2007, 04:35:11 PM

I'm running a Weber 32/36 on my bone stock 1.3. I'm wondering what jet combo should I be running with this setup and if anyone has anymore info on getting it dialed in????

Try a search for weber at Ack's FAQ (the link is in my signature). You will find several documents and links that shoould get you going in the right direction.

Title: Re: Weber Carb Setup Question
Post by: MiniFJ on December 21, 2007, 08:41:11 AM

Thanks for the link and the quick reply. That was the info I was looking for.

Title: Re: Weber Carb Setup Question
Post by: MiniFJ on December 26, 2007, 05:42:03 PM

Just updating....

I switched out some of the jets on my Weber tonight. Thing runs great now... way more power then before. I did find that a "50" primary idle jet was a little too big for a stocker, the plugs were wet after two minutes of running it. So I knock it down to a "40" and the thing ran great. So here is what worked:

40 primary idle jet
50 secondary idle jet

160 primary air jet
170 secondary air jet

135 primary fuel jet
140 secondary fuel jet

1 3/4 turns out on the idle/air screw

Hope this helps someone looking to get and tune a weber. Happy Wheelin'  ::)