ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: Spitfire Rick on January 04, 2008, 11:41:45 PM

Title: tbi wiring
Post by: Spitfire Rick on January 04, 2008, 11:41:45 PM

I have a 1.3 tbi fuel injection intake & throttle body & I have a wiring harness from a 1.6 8v tbi(tracker) that was in another rig the harness was modified so only a few power & ground wires were needed to power ecm.  the wires on the tbis  have the same plugs.  Im wondering if I can use the 1.6 harness to make the 1.3 tbi work ?.

Title: Re: tbi wiring
Post by: Rhinoman on January 07, 2008, 05:10:26 AM

You'll have to compare the two to see how similar they are.

The Sammy EFI info can be found here:

http://www.suzukiinfo.com

The Track/Kick info is here:

http://www.btinternet.com/~j_holland/pages/schematics.html

Title: Re: tbi wiring
Post by: Spitfire Rick on January 07, 2008, 06:30:34 PM

got into this swap & have decided there are slight differences in the throttle body so Im going to use 1.6 tbi on the sami tbi intake & I put the tracker in tank fuel pump inthe sami tank Ive got it almost ready to run