ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: sanjuansheriff on January 07, 2008, 09:38:34 PM

Title: Samurai front bearings
Post by: sanjuansheriff on January 07, 2008, 09:38:34 PM

Hello folks,
I am in the middle of doing a rebuild of my front end including wheel bearings, king pin bearings, Knuckle seals, etc. I now can't remember if the outer wheel bearing had a grease seal on it. My manual doesn't mention installing one.... Could this correct?

Thanks for your help and expertise,
Dennis

Title: Re: Samurai front bearings
Post by: mrfuelish on January 07, 2008, 09:54:56 PM

No there is just one on the inner bearing, the out side bearing is sealed by the hub.

Title: Re: Samurai front bearings
Post by: sanjuansheriff on January 08, 2008, 12:38:58 AM

Thanks for the quick reply.... You've put my mind at rest.

Thanks again,
Dennis