ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: RJkick on January 08, 2008, 11:35:26 AM
-
Well, the window went down and up really slow yesterday and then stopped doing either. I removed the door panel and some of the rain proofing plastic to see what happened. The cable had 2 loops sticking out of the regulator, took an hour but I managed to pull those out.
It looks like the cable may have busted since the end of it is now stuck in the top plastic wheel where I assume it used to go around, pulley I suppose. Does the end mount to something on the window or can I JB weld it to where it broke off or is it the best option to just purchse another regulator\cable assembly?
I looked at a haynes manual but can't tell where the cable mounts to
Any inexpensive replacement suggestions or schematics of where the cables mount?
Thanks
-
I had the exact same problem with the exact same door! the cable is supposed to make a loop. search on ebay for a co that sells PW motors they didn't have the door listed but by going to their site I found it. cheap like $50 only prob was they would send to Canada to I got a set of manual back doors off a friend and put those on.
-
Turns out the cable is kinked on the spool
Does anyone know if you can get another or just buy another motor\cable
If so does anyone know a good place to get one?
-
I checked around myself for parts for my 91 Sidekick,but it was easier and allmost as cheap to replace the entire regulator.Like he said,check EBAY that is wher I got mine for $56 shipped.
-
Excellent
I'll check ebay
www.aftermarket4x4.com has some as well and I'm waiting on the price
I have it so it is stuck rolled up so it is all good