ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: SunrunnerGT on January 12, 2008, 08:30:39 PM

Title: Licence plate lights
Post by: SunrunnerGT on January 12, 2008, 08:30:39 PM

How do i replace these light bulbs?? I cant get the plastic dome cover off that covers the bulbs.

Title: Re: Licence plate lights
Post by: mrfuelish on January 12, 2008, 09:39:34 PM

on my samurai there is two screws that hold each cover on the plastic lens.

Title: Re: Licence plate lights
Post by: ack on January 13, 2008, 01:21:56 PM

Patience, grasshopper...

If you cannot fit a philips screwdriver onto the two screws that hold each lens in place then remove the housing, you may be forced to remove the entire assembly. Do this by removing the inside trim on your tailgate then removing the two nuts that hold it in place with a 10mm socket.  That's how I did it, then again, I was modding the assembly it to fit on the tailgate of my Samurai...