ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: kozaz on January 17, 2008, 09:59:08 AM

Title: Has anybody did a 6-lug conversion (Toyota) for the Tracker Front Hub?
Post by: kozaz on January 17, 2008, 09:59:08 AM

I'm trying to find out if I upgrade to a rear toyota 4x4 axle, (6-Lug) is there anybody that converted the front Tracker hub from 5 lug to 6 lug?

I could go with a toyota 2wd axle, (5-lug) but would like to install the stronger allow shafts that are only available for the Toyota 4x4 6-lug axle.

Also, I would like to stay away from the ford nine rear and away from wheel spacers/adapters.

Any Ideas would be appreciated!

Ryan

Title: Re: Has anybody did a 6-lug conversion (Toyota) for the Tracker Front Hub?
Post by: Zukipilot on January 17, 2008, 10:21:14 AM

Stan (37Kicker) has made a kit to adapt the Kick front end to use Toyota CV's. I'm sure he has looked into this, you may wnat to PM him. He does not get on line much and may miss this thread when he does get back on line.

Zig

Title: Re: Has anybody did a 6-lug conversion (Toyota) for the Tracker Front Hub?
Post by: Rhinoman on January 17, 2008, 11:18:25 AM

Suzota redrilled the stock hubs.

Title: Re: Has anybody did a 6-lug conversion (Toyota) for the Tracker Front Hub?
Post by: kozaz on January 19, 2008, 02:17:15 PM

Quote from: Rhinoman on January 17, 2008, 11:18:25 AM

Suzota redrilled the stock hubs.

That's great news!