ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: RifleRide on January 19, 2008, 04:22:11 PM

Title: Heater control replacement
Post by: RifleRide on January 19, 2008, 04:22:11 PM

I want to replace my heater blower switch and put on some new cables on my 87 Sammy. I have gotten all the bolts loose on the dash, but according to the service manual, I should be able to disconnect the controls from the dash unit, but I dont see any bolts or screws.  It looks like plastic to plastic.  Any suggestions.

Title: Re: Heater control replacement
Post by: bashzuk on January 20, 2008, 02:19:47 PM

what type of rig?

Title: Re: Heater control replacement
Post by: RifleRide on January 20, 2008, 07:10:43 PM

87 Sammy,  Sorry I had to modify my request to include my rig?

Title: Re: Heater control replacement
Post by: daddyizzle on January 20, 2008, 07:34:06 PM

First, take all the knobs off the levers, I believe you tilt up but what ever you do, just be gentile with them and ease them off. Then stick a hook through the face piece and carefully pull it out. You'll find some screws. Hope that helps. ;)

-Adam ;D

Title: Re: Heater control replacement
Post by: RifleRide on January 21, 2008, 03:27:49 PM

Thanks, I will give that a try tonight.