ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: Nicksidekickin on January 30, 2008, 07:10:29 PM
-
Ok i'm goin to take my kick to get to front end aligned in a couple days but i want to get it as close as i possible can before then. So can any of you guys with 1.5 coil spacers tell me what the measurement from the inner fender well to the brake rotor is so i can get it pretty darn close oh yeah i put camber bolts in so i can adjust it thanks guys.
-
when i did mine, i just cranked the adjustment pretty much all the way (w/wheels off, so i could watch the cam work) and looked at it after it was back on the ground.
turns out i had one side perfect (go figure) and my alignment guy only had to make minor adjustment on one side.
i was more impressed w/how much toe adjustment was needed.
-
yeah i've did that but i over adjusted and am goin to have to take it back just alittle and i'm just tryin to get it as close as possible