ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: BIG DOG on February 05, 2008, 05:52:36 PM

Title: Spring spacer center hole size.
Post by: BIG DOG on February 05, 2008, 05:52:36 PM

I have read where you can take a jeep spring spacer and bore it out 2.25". So I hve been thinking that the center hole needs to be 2.25" .I measured today and I'm sure that my center bumpstop post is 2.5" I'm planning to turn mine out of steel or nylon on my lathe.4" with a center hole of 2.25 is what I planned but it looks like it will be 4" with a 2.5" hole .Is this correct or am I missing something?
Thanks!

Title: Re: Spring spacer center hole size.
Post by: jeff1997 on February 05, 2008, 06:00:59 PM

All my spring spacers are 2.4" inside diam.