ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: fallguy on February 12, 2008, 01:48:51 PM

Title: 1.6L 16V header
Post by: fallguy on February 12, 2008, 01:48:51 PM
who makes a good 1.6L16V header the only one out there that i have seen is calmini's are there anny others ?
thanks
Title: Re: 1.6L 16V header
Post by: MaD.72 on February 12, 2008, 02:05:33 PM
http://www.rocky-road.com/kickthorley.html (ftp://http://www.rocky-road.com/kickthorley.html)
Title: Re: 1.6L 16V header
Post by: Yankee-Tim on February 12, 2008, 03:48:02 PM
I've got the 16V Calmini stainless header.  Direct fit and a real nice item.  Price is decent as well.
Title: Re: 1.6L 16V header
Post by: fallguy on February 12, 2008, 04:44:50 PM
i didnt think calminis were stainless i thought they were only ceramic coated?
Title: Re: 1.6L 16V header
Post by: Drone637 on February 12, 2008, 05:50:11 PM
I believe Hawk Suzuki sells one as well. 
Title: Re: 1.6L 16V header
Post by: RACER X on February 12, 2008, 08:11:21 PM
dOUG tHORLEY SELLS THE BEST IVE DONE SOME RESEARCH ABOUT 6 MONTHS AGO AND DT BEAT THEM ALL
Title: Re: 1.6L 16V header
Post by: ROSS on February 12, 2008, 08:33:06 PM
The 8V is stainless 16V is ceramic from calmini
Title: Re: 1.6L 16V header
Post by: phloop on February 12, 2008, 09:12:47 PM
OK, who sells a 16v header other than c-m or rr. Does Doug Thorley really make one? I will be looking for one this summer and will not deal with either of the two dealers mentioned.


Past dealings with those two cheezy out-fits has left a bad taste. :P >:(
Title: Re: 1.6L 16V header
Post by: lostsamurai on February 12, 2008, 10:47:29 PM
Low range off road out of provo utah has the doug thurley and the calmini in stock, I compared them side by side and while I like how the dt goes all the way down to your catalytic converter, the calmini has a way better look, tig welded ported to match the gasket no restrictions, just all around nicer in my opinion im happy with the calmini.