ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: Grandmaster on October 24, 2004, 04:26:13 AM

Title: How to: Welding Rear-end
Post by: Grandmaster on October 24, 2004, 04:26:13 AM

I read a how to on it once, does anyone know of the link, or does anyone have pictures?

Title: Re: How to: Welding Rear-end
Post by: wildgoody on October 24, 2004, 05:50:36 AM

Read the cheep 4 door buildup
article, it's in there

Title: Re: How to: Welding Rear-end
Post by: wildgoody on October 24, 2004, 06:00:47 AM

Sorry, that pic isn't big enough,
ask whitfield where he posted it

Title: Re: How to: Welding Rear-end
Post by: TomKat on October 24, 2004, 06:03:42 AM

I've done a few of these with good results...http://www.island4x4.com/4x4tech/axle/weldeddiff1/index.html

Title: Re: How to: Welding Rear-end
Post by: lil_Truck on October 24, 2004, 09:09:52 AM

Quote

I've done a few of these with good results...[url]http://www.island4x4.com/4x4tech/axle/weldeddiff1/index.html[/url]

That is the "BEST" page/article I've seen on how to weld the rear end.

It's hard to beleave but if you just weld the gears to the carrier it can brake loose and do alot of damage to bearing and gears.  

Title: Re: How to: Welding Rear-end
Post by: Grandmaster on October 24, 2004, 12:28:38 PM

Thats the article i was looking for.

So if i follow that, everything should be good to go?

Title: Re: How to: Welding Rear-end
Post by: wildgoody on October 24, 2004, 12:40:45 PM

Ya, off road, on road is a twisted axle
waiting to happen

Title: Re: How to: Welding Rear-end
Post by: TomKat on October 24, 2004, 12:57:20 PM

Quote

That is the "BEST" page/article I've seen on how to weld the rear end.

It's hard to beleave but if you just weld the gears to the carrier it can brake loose and do alot of damage to bearing and gears.  

Did you learn that the hard way, too? ::)  I liked that article a lot, too, so I saved it in favorites for future reference.