ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: S.Sidekick on March 04, 2008, 05:54:26 PM

Title: So close....:(
Post by: S.Sidekick on March 04, 2008, 05:54:26 PM

k, i called sky today to order the 2" body lift for my sidekick, and he said that his kit doesnt come with the bumper brackets to raise the front.  and then that the rear will have a gap to.  i really like the kicker to look clean not chopy so does anyone have any pics or oppinions on how this looks with the gaps, plz help
jon

Title: Re: So close....:(
Post by: erik the red on March 04, 2008, 06:07:18 PM

Get an aftermarket front and rear bumper!!  ;)

I'll take pix of mine; I have Sky's kit installed, and yes, there are gaps. I don't think it looks horrendous, but I also plan on installing a Shrockworks front bumper and TT's rear. It's all about personal preference.

Title: Re: So close....:(
Post by: jeff1997 on March 04, 2008, 06:25:09 PM

Check with Masterkit1 out of Canada. Their body lift comes with relocation brackets.

Title: Re: So close....:(
Post by: tipover on March 04, 2008, 07:14:35 PM

for the front, I just cut some 2"x2" tubing about 1" long.  put holes on top and bottom.  for the bottom, I took a strap of .25" about 3 inches long and put 2 holes 2" apart and put it on the bottom mount and my bumper looks stock.

For the rear I did the same thing for the top of it. and bent the bottom of the sell bumper to match the angle of the frame(four door), and drilled self tapping bolts into the frame.  Put the cover on, it looks like stock.

It is so easy.