ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: mbmarkyb on October 16, 2004, 08:35:04 PM
-
went to a local clubs new site that has only been open a couple of months, 5 zuks went in the end 2 kicks & a few sammys,, lots of other vechs there too
here are some of the pictures
(http://pic11.picturetrail.com/VOL385/1287625/5409850/69216042.jpg)
(http://pic11.picturetrail.com/VOL385/1287625/5409850/69215943.jpg)
(http://pic11.picturetrail.com/VOL385/1287625/5409850/69210163.jpg)
Got a little bit of air on this one
(http://pic11.picturetrail.com/VOL385/1287625/5409850/69221900.jpg)
(http://pic11.picturetrail.com/VOL385/1287625/5409850/69221861.jpg)
new rear winch in action
(http://pic11.picturetrail.com/VOL385/1287625/5409850/69221200.jpg)
lucky no breakages just a very warm clutch
-
Very 8)
-
Looks like a blast!
-
YeeeeeeeeeeeeeHaaaaaaaaaaaaaaa!!!!!!!!!!
(http://pic11.picturetrail.com/VOL385/1287625/5409850/69210163.jpg)
Got buttPucker? ;D
-
you guys making that poor samurai pull out both those trackers at the same time 8)
-
thats cool...
-
it took two sammys to get me out, the front of my tracker was under waterm nasty hole :-)
-
mbmarkyb,
That photo of you getting some air under ya is EXACTLY how I grenaded my front diff :-[ .Are you running a stock alloy diff or have you changed to the steel GV one ?
Shane
-
I took the photo after coming through there as i felt the front getting air.
Thats Nicks truck and he does run the steel GV axle on 31.10.50s.
I still run the ally one on 33.12.50s and touch wood its still intact. that climb was ok not to much sudden take up of drive so it was ok on the axle.
There were a few where my wheels came up and it started boncing and so i backed off very quickly and let some one else have a go :-) as you say the axle casing would have been the first to go pop
-
wish i could have gone with you, I'm craving some wheeling!
-
Nice pic's and lots of mud, that's what I like ;D
-
Love the wheeliee pic man! 8) All of them look like fun though. I never get tired of seeing pics of zuks wheelin. Thanks
Mike
-
Great pics, I'd love to see some close-up pics of the Exo Cage and Snorkel. 8)
-
http://www.markyb.co.uk/roll_cage.htm
I would post the pics but they came out a little big but if you go to the above link there are a few of the cage.
the snorkel still need some polishing :-)
I will take some pictures this weekend as i doing a few more bits to the truck have some new shocks :-)