ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: bashzuk on April 01, 2008, 12:31:50 AM

Title: Samurai hubs on a tracker
Post by: bashzuk on April 01, 2008, 12:31:50 AM

I was wondering if Samurai Manual hubs will fit on a 96 geo Tracker.
Did a search couldn't Find anything.
Any helpful information appreciated.

Title: Re: Samurai hubs on a tracker
Post by: Yankee-Tim on April 01, 2008, 06:46:20 AM

They will not fit correctly.

Title: Re: Samurai hubs on a tracker
Post by: bashzuk on April 01, 2008, 08:02:51 AM

Thanks, guess I'll go buy some then ;D

Title: Re: Samurai hubs on a tracker
Post by: Drone637 on April 01, 2008, 09:54:56 AM

The problem is the clearance.  The Sammy hubs just aren't quite as long as the Tracker ones.  However, most people say that if you just run two sets of gaskets that is enough to fix the problem.

Title: Re: Samurai hubs on a tracker
Post by: phloop on April 01, 2008, 02:00:16 PM

The kick has a snapring and spacer washer that holds the axle in place that there is no clearance made for in the Sami hub's. I have a set of Sami hubs that I will be adding to my 95, so I have looked into this myself.