ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: mannypena3 on October 14, 2004, 07:35:20 PM

Title: Weber Carb Install HELP?!!
Post by: mannypena3 on October 14, 2004, 07:35:20 PM

Hello Everyone, I'm pretty new to Sami's and well I started planning the build a long time ago...here goes I bought a weber carb 32-36 and adapter plate  but i need to purchase the throttle linkage plate now, anyways I dont have an installation manual and I am hoping the zuki world can help in attaching all necessary vent and vaccum lines to their respactable places or what needs to be capped off HELP??!!

Title: Re: Weber Carb Install HELP?!!
Post by: wildgoody on October 15, 2004, 03:13:31 AM

This is from a post Eric made for
CZ, has lot's of good info on setting
up the carbs after install and could be
of some help
http://www.zukiworld.com/month_050102/feature_dcoesetup.htm

Title: Re: Weber Carb Install HELP?!!
Post by: mannypena3 on October 15, 2004, 07:03:37 AM

Thanks for the link, would anyone happen to have some instructions on the installation from a prior carb install. I bought the carb and adapter separately not in the complete kit, Money IS an issue. Or does anyone have pictures of their engine bay for me to look at? Im trying to get an idea of the placement and vacuum line(s) hook up. The carb is an electric choke and I plan on just connecting the water line that go to the choke together.  ???

Title: Re: Weber Carb Install HELP?!!
Post by: wildgoody on October 15, 2004, 10:38:45 AM

PM CZ he has a dual 40 Webber setup,
he would be a wealth of info

This setup is no longer available so
you have a rare duck, don't kill it  ;)

Wild