ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: Uncivilized on May 05, 2008, 05:10:03 PM

Title: Trackick Winch Bumper Help
Post by: Uncivilized on May 05, 2008, 05:10:03 PM

Can someone tell me what the size of the fairlead hole is supposed to be, and where it's placement is to the winch mounting surface?
Thanks  ;)

Title: Re: Trackick Winch Bumper Help
Post by: RHodge on May 05, 2008, 07:56:20 PM

well when I made mine I put the hole in the middle but when I mounted the winch I fount that the winch isn't centred and I'm going to have to make the hole bigger too the driver side
(http://i128.photobucket.com/albums/p185/hodge60/P1110282.jpg)

if you look you can see the winch line is futher to the left (driverside)

Ryan

ps make sure you set the winch back a little for the bolts on the fiarlead

Title: Re: Trackick Winch Bumper Help
Post by: Uncivilized on May 06, 2008, 03:46:42 PM

Not exactly what I was after, I'm really looking for the actual measurement of the cable hole in the front of a Calmini, or Shrockworks bumper. I'm making one, and want to put in the slot before welding on that front piece. Outlined in green in the pic...
I was also wondering where that hole meets the winch mounting surface... is it flush, or raised a half inch or something