ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: 92Sidekick4x4 on October 12, 2004, 06:07:11 PM

Title: Diamater of fuel hose
Post by: 92Sidekick4x4 on October 12, 2004, 06:07:11 PM

I am needing an approximate diameter of what the inner diamater of the fuel filelr hose so i can put a steel spacer in mine.

Title: Re: Diamater of fuel hose
Post by: wildgoody on October 12, 2004, 08:02:56 PM

It is best to get a section of
Marine Exhaust Hose, That's
what I'm using, if you don't cut
your stock hose at just the right
place, it won't fit right, even with
a steel sleeve spacer

I have a source if you want it,

International Rubber Supply
Colton, Ca.

Wild

Title: Re: Diamater of fuel hose
Post by: 92Sidekick4x4 on October 13, 2004, 03:23:46 AM

heather where did u cut yours?

Title: Re: Diamater of fuel hose
Post by: hcgalvin on October 13, 2004, 03:35:51 AM

Right in the middle. I think the steel spacer was basically galvinized pipe that I found in the back yard. I believe it was 2"?

Here's some photos:

(http://www.zuwharrie.com/images/stories/4drkicklift/dcp_5957.jpg)

(http://www.zuwharrie.com/images/stories/4drkicklift/dcp_5958.jpg)