ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: wattsie on May 14, 2008, 05:02:52 AM
-
G'day. Just waiting for delivery of new calmini 3 inch suspension lift for my 1990 swb vitara JX.
Anyway just needing correct advice for fitting instructions "been told it's a great kit but instructions don't give all the information for corect fitment.
Any info/photos/diagrams on what im up for would be very much appricated.
-
Step by step by some cool guy with a white sidekick ::)
http://www.izook.com/tech/tracker/3inchtrackkick/3inchtrackkick.htm (http://www.izook.com/tech/tracker/3inchtrackkick/3inchtrackkick.htm)
HTH,
Zig
-
You will notice a couple minor differences (I was replacing my calmini 2" with their 3" but it will show you what all is involved.
Zig
-
Looking at the pictures just below step #20, you will notice that the upper strut mount has been flipped:
***DO NOT DO THIS***
I wasted many CV's trying to get a little more drop out of the front suspension. If your front suspension is currently stock, this is a non issue, but if you have flipped the upper mount for a Calmini 2" lift or a spacer style lift, be sure to flip it back to stock (small flange up) or you will over extend and waste your CV's.
Zig
(http://www.izook.com/tech/tracker/3inchtrackkick/images/image035.jpg)
-
G'day
The link with instructions and everything else looks on the money what i was after.
I will getting reading/research straight away
Cheers heaps for that Zig......