ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: Trackin_Tracker33 on May 19, 2008, 05:34:53 PM

Title: GO Tracker's cross member
Post by: Trackin_Tracker33 on May 19, 2008, 05:34:53 PM

So we put the tracker up on the lift this morning for its new full exhaust.  When the lift was full up what we saw was a terrible site.....   The transmission crossmember was completely bent around, with most of the bolts ripped out.  The transmission was just hanging there with NO support.  Its a very good thing I wanted to blow money on the exhaust because that could have ben a disaster.....
      The tracker is going under the knife tomarrow morning.  We are going to fabricate a new crossmember  ill post pictures if anyone is interested.

Title: Re: GO Tracker's cross member
Post by: lil_Truck on May 20, 2008, 08:10:59 AM

Always interested when someone fabs up any part.  Good Luck

Title: Re: GO Tracker's cross member
Post by: Trackin_Tracker33 on May 20, 2008, 05:42:24 PM

(http://www.zukiworld.com/forum/gallery/7037_20_05_08_5_39_43.jpg)

Title: Re: GO Tracker's cross member
Post by: Trackin_Tracker33 on May 20, 2008, 05:43:13 PM

(http://www.zukiworld.com/forum/gallery/7037_20_05_08_5_41_28.jpg)

Title: Re: GO Tracker's cross member
Post by: Trackin_Tracker33 on May 20, 2008, 05:44:08 PM

Bulletproof   ;D

Title: Re: GO Tracker's cross member
Post by: tipover on May 21, 2008, 10:40:59 AM

did you reinforce the frame or is that needed?

Title: Re: GO Tracker's cross member
Post by: Trackin_Tracker33 on May 21, 2008, 01:15:48 PM

Quote from: tipover on May 21, 2008, 10:40:59 AM

did you reinforce the frame or is that needed?

I really didnt see any reason to reinforce the frame.  I just put bigger bolts into the frame, I dont remember the size