ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: mudfkr on July 06, 2005, 05:03:14 PM

Title: I should really......
Post by: mudfkr on July 06, 2005, 05:03:14 PM
Finish one project before starting new one but I couldn't help myself and had to buy these......
(http://www.omghi2.us/april05/Project rigs 002.jpg)

The Black '84 410 has a knacked 1Lt so the rusty  '87 413 is going to donate the motor, 5spd and diffs to the cause. Then the firewall (bulkhead?) and floor pan is going to be used on the 410 chassis below to make a buggy out of it, I want to keep the front clip on as I think the 410s front looks kinda cool  :)
(http://www.omghi2.us/april05/Project rigs 004.jpg)

Included in the deal was another G13 with gbox, two F10's with gbox, numerous diffs for 413 and 410, four 410 tcase's and loads of other stuff so we have heaps to chose from to make the buggy out a. I want to put rear steer in seems we have a extra front diff sitting around  :P  ;D


Title: Re: I should really......
Post by: HotRod on July 06, 2005, 05:24:22 PM
Dang. I'll i anted was A parts car ;D
That must've been a swinging deal.
Title: Re: I should really......
Post by: mudfkr on July 06, 2005, 06:07:25 PM
Was actually 2 deals, I found the 410 first then a few days latter spotted the 413 with all the extras. Then a little click happened in my head and a plan was hatched  ;D
Title: Re: I should really......
Post by: Rhinoman on July 06, 2005, 11:52:19 PM
413 diffs won't fit a 410 but I think you can swap the complete axles OK. Also if you plan on swapping floor pans take a good look at the chassis. The earlier 410 frame is different and the bodys don't interchange.
Title: Re: I should really......
Post by: mudfkr on July 07, 2005, 08:39:47 AM
I meant swap complete axles Rhino, The Chassis is an '84 so hopefully there won't be to many hassles and if so the MIG and grinder will take care of them.

Now what should I do with this one I just brought....
(http://202.21.128.20/photoserver/38/11203038_full.jpg)

'89 escudo 1600 manual, fuel pump not working shouldn't be too much of a problem to fix  ;D
Title: Re: I should really......
Post by: Dihnekis on July 07, 2005, 08:43:58 AM
Damn where do you find all these things?
Title: Re: I should really......
Post by: explosivo on July 07, 2005, 08:45:24 AM
I had to do a double take at the last pic... I thought those wheels had 8 lugs. :o

Of course if there was a narrowed D44/D60 under there, the bottom of the diff would be rubbing on the ground and the top would have the engine resting on it :P
Title: Re: I should really......
Post by: zaggy on July 07, 2005, 11:29:07 AM
We does he get all those wonderful toys.......

I can see that hardtop with a 2.0L turbo and.......

Zag
Title: Re: I should really......
Post by: mudfkr on July 07, 2005, 05:57:03 PM
Quote
We does he get all those wonderful toys.......

I can see that hardtop with a 2.0L turbo and.......

Zag


I just keep an eye out on a local trader kinda like Ebay.

The Escudo will be keeping the 1600 in it, 2 Lt would be nice but they  are too much $$$$ to buy over here and I'd rather spend $$ on gearing and may be some Yota axles. I might have crack at an SAS with coils on this one  :)


Title: Re: I should really......
Post by: LawDog on July 09, 2005, 01:48:46 AM
Quote

([url]http://www.omghi2.us/april05/Project[/url] rigs 002.jpg)

Wow, two tintops, sweet find!  The black one even comes with the rare and elusive Pooping Beagle Front Suspension! ;D
Title: Re: I should really......
Post by: bus_driver on July 09, 2005, 06:10:31 AM
sounds like a great deal and a dog as well is it house trained ;D
Title: Re: I should really......
Post by: mudfkr on July 09, 2005, 09:31:36 AM
Quote

Wow, two tintops, sweet find!  The black one even comes with the rare and elusive Pooping Beagle Front Suspension! ;D


LOL ! Thats my bitch "Jess" she is a Jack Russell and no she wasn't taking a dump she was sniffing some thing, I have Jack Russell  Dog as well "JR" he'd fit clean under that 410 with out ducking  :).

I've started stripping that 413 out now and OMG has it got some rust in it I Lent on the rubber guard flare and it fell off  :o Radiator mounts just crumbled apart no spanners needed   :o