ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: kubik1981 on July 25, 2008, 08:43:11 AM

Title: 90 8valve tracker transfercase question
Post by: kubik1981 on July 25, 2008, 08:43:11 AM

does anyone have a diagram of the top of the transfer case.  I have no 4x4 indicator so i replaced with a brand new one plugged it in tested before screwing in and it work.  Screwed it in and nothing.  So i pulled it back out tested by hand still works but noticed when i shifted into 4wd that nothing is moving in the hole where the switch goes.  does anyone have any ideas or diagrams. ???

Title: Re: 90 8valve tracker transfercase question
Post by: spyder0069 on July 25, 2008, 10:49:11 PM

Not sure on the tracker but on the sammy it has a small metal ball under the sensor and the ball triggers the switch.  I assume the ball is raised mechanically by the internal linkage.  If the tracker is the same then maybe you are missing that ball.

Title: Re: 90 8valve tracker transfercase question
Post by: kubik1981 on July 26, 2008, 06:04:25 AM

yeah there is nothing down in there. Is there anyway to get the ball for that switch.  also what kinda fluid goes in the transfercase?

Title: Re: 90 8valve tracker transfercase question
Post by: Drone637 on July 26, 2008, 12:42:28 PM

I just put 80/90 weight in the transfer case.  Works great for me.

As for the ball, I would give Hawk Suzuki a call if your in the states.

Title: Re: 90 8valve tracker transfercase question
Post by: kubik1981 on July 26, 2008, 10:21:39 PM

ok i will do that and thank you for the fluid type