ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: AL Halladay on September 03, 2008, 12:12:15 PM

Title: Front fenders
Post by: AL Halladay on September 03, 2008, 12:12:15 PM

I am going to replace my front fenders with new ones. I can find fenders for 86-88 and 90-95. I have an 88.5 tin top.  In the tech section it said there was a slight change in the grill but if you order a new grill it says it will fit 86-91. Then at Suzuki john web page he says 86-early 88 then 88.5- 95   what fenders fit what years?? Anybody know fore sure?

Title: Re: Front fenders
Post by: Drone637 on September 03, 2008, 01:30:21 PM

The fenders are the same through all the years.  So you don't have to worry about that.  :)

Title: Re: Front fenders
Post by: Jeremiah on September 03, 2008, 02:21:36 PM

Make some fiber glass ones  ;D

Title: Re: Front fenders
Post by: Drone637 on September 03, 2008, 03:14:16 PM

Now that would be cool.  Of course, if he lost the fenders due to trees and rocks imparting their will upon them, fiberglass might not be the best choice of replacements.  :D

Title: Re: Front fenders
Post by: pepatt on September 03, 2008, 08:56:13 PM

Quote from: Drone637 on September 03, 2008, 03:14:16 PM

Now that would be cool.  Of course, if he lost the fenders due to trees and rocks imparting their will upon them, fiberglass might not be the best choice of replacements.  :D

Yeah, but fiberglass fixes fiberglass!  :D
Maybe I should make a mold of mine now before they get "modified"  ::)

Title: Re: Front fenders
Post by: Drone637 on September 04, 2008, 10:46:35 AM

Quote from: pepatt on September 03, 2008, 08:56:13 PM

Yeah, but fiberglass fixes fiberglass!  :D
Maybe I should make a mold of mine now before they get "modified"  ::)

True, but a hammer fixes metal.  :D  As for making a mold, might not be a bad idea. And if you flared them out a bit you could probably sell a few pairs.  :)

Title: Re: Front fenders
Post by: pepatt on September 04, 2008, 09:21:27 PM

Quote from: Drone637 on September 04, 2008, 10:46:35 AM

True, but a hammer fixes metal.  :D 

Or ruins it, depending on the hammeree!  :-\

Quote

  ...And if you flared them out a bit you could probably sell a few pairs.  :)

Hmmmm. How about pre-trimmed and flared? Just bolt 'em on with your new 35" tires!

Title: Re: Front fenders
Post by: Drone637 on September 05, 2008, 09:38:06 AM

Quote from: pepatt on September 04, 2008, 09:21:27 PM

Or ruins it, depending on the hammeree!  :-\

I assure you I have a very delicate touch.  That is why my SJ has a perfectly smooth skin with nary a dent on it.   :P

Quote

Hmmmm. How about pre-trimmed and flared? Just bolt 'em on with your new 35" tires!

No lift required!*


*May require additional lift on some vehicles.  Results may vary

Title: Re: Front fenders
Post by: pepatt on September 05, 2008, 09:19:58 PM

Quote from: Drone637 on September 05, 2008, 09:38:06 AM

I assure you I have a very delicate touch.  That is why my SJ has a perfectly smooth skin with nary a dent on it.   :P

Hmmmm. Your hammer must require less liquid "courage" than mine to operate! :( :o

Quote

No lift required!*
*May require additional lift on some vehicles.  Results may vary

No, really - this is the magic fix. Put these fenders on and you can go anywhere.! ;)

Like a mechanic in a bottle! ::) ... or "power bands" in a dirt bike! :-[ :(