ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: Amilla on September 05, 2008, 01:02:39 PM
-
Hey all, i am dealing with the rear breaks on my samurai.
I have toy axles and was wondering if anyone knows of a decent inexpensive proportioning valves to use.
I want to get rid of the duel break lines that the samurai came with and go with a 2 line in 1 line out.
Not really wanting to spend 130 bucks for a new one from lowrange or 80 for one that might leak.
Thanks
Amilla
-
It would be kind of a pain to bleed but you could just cheat and run a Y in reverse. Have your two lines going in and a single line going out. :)
-
this about the cheepest (least expensive iv seen)
http://store.summitracing.com/partdetail.asp?autofilter=1&part=SUM%2DG3905&N=700+115&autoview=sku
It's 1/8 npt so what I did on a Datsun 510 is make my own lines metric on one side us on the other
you can rent or buy a double flare kit from a lot of parts stores
Ryan
-
That's just what I have been looking for!
Thanks Ryan
Amilla
-
It would be kind of a pain to bleed but you could just cheat and run a Y in reverse. Have your two lines going in and a single line going out. :)
i agree i would just run a brass "T" 1 line in 2 out i know carquest has those for about 5 bucks a lot less hassle
-
Some thing to think about, the stock pro. valve near the rear is adjustable. I heard this from a good source, just can't remember his name for some reason. :laugh: