ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: homer74 on September 22, 2008, 06:04:26 AM

Title: GM alt what belt ???
Post by: homer74 on September 22, 2008, 06:04:26 AM

Bought a used gm alt kit, well long story short my pullies are not sepentine so what belt do i need?? right now i have the stock belt but its way too tight and is throwing belt angle and allignment off any help would be great.

Title: Re: GM alt what belt ???
Post by: Bigzook on September 22, 2008, 07:16:25 PM

Old trick is to tie a string around the pulleys, measure string and take that # to parts store. Any counter dude worth his salt will know that the part # of belts is also the length. Example for V-belts 17335 is 17/32" wide and 33.5" long.Serpentine belts are almost the same. 775K6 is a 6 rib belt 77.5"long. There are some other numbering systems out there but they all kinda use the same principle. Most alternator belts are a 15/32" width BTW.

Title: Re: GM alt what belt ???
Post by: homer74 on September 22, 2008, 08:49:02 PM

Thanks will do   ;D