ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: vitaradownunder on September 22, 2008, 07:42:06 PM

Title: vitara Diff Centres into Sierra
Post by: vitaradownunder on September 22, 2008, 07:42:06 PM

Which is it again the Vitara front diff centre or rear diff centre into the sierra rear housing. As in theory i could run that centre in the front of the sierra with the 26 spline hardened shafts.

I did a little search and nothing really came up that was any use.

Thanks in advance.

James

Title: Re: vitara Diff Centres into Sierra
Post by: Drone637 on September 22, 2008, 09:08:02 PM

Front diff from a 96-98 Vitara, that gives you the 26 spline side gears and it will fit in an SJ-413.  You might want to just get the gears though, and put them in a steel diff instead.  Then you can use your stock side gears.

Title: Re: vitara Diff Centres into Sierra
Post by: idaholwb on September 28, 2008, 08:27:57 PM

 If you do just gears in your diffs you need diff cans or spacer setup from one of the Suzuki vendors. It will keep your crosspin in place where it needs to be.