ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: RACER X on September 30, 2008, 06:45:17 PM
-
so I'm finally ready to tackle this head gasket my rigs a 98 16 valve 1.6 liter two door auto no a/c
so does any one have a good write up i have the fact service mags and the Hines which i was told was wrong on top dead center so any one have any knowledge of a write up or any expertise on this subject ?????????????? I'm a Lil afraid as this is the furthest Ive ever broken down this engine I have the gaskets and a good torque wrench also the timing belt and water pump but i feel I'm forgetting something... what else .........???
-
I Think the Head Bolts are tty bolts so you may need to buy some.
-
I just finished mine and there are a few things you will need. I used anti seize on all of my bolts, you will need a head gasket kit ($100), you may need a timing cover so check if yours is good, throw in a new thermostat since the coolant will be drained and you will have the gasket. The most important thing is to locate a nearby shop that works on heads as you will want to get yours checked and the exhaust valves are probably toast
-