ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: s27warner on October 10, 2008, 08:19:37 AM

Title: slip yoke driveshaft question
Post by: s27warner on October 10, 2008, 08:19:37 AM

hey guys.... I need to know if the slip yoke from a rear driveshaft on a 1994 8v tracker is the same spline as a rear on a 1990 8v tracker... I know someone out there knows the answer ... Thanks guys

Title: Re: slip yoke driveshaft question
Post by: bentparts on October 11, 2008, 05:21:36 AM

Yeah, they're the same. They changed the tooth count in 96.

Title: Re: slip yoke driveshaft question
Post by: s27warner on October 11, 2008, 02:42:11 PM

thank you very much..... Didn't want to buy the wrong part :)

Title: Re: slip yoke driveshaft question
Post by: Skyhiranger on October 13, 2008, 06:43:03 AM

You do need to make sure they are both either 4x4 or 4x2......since the 4x4 slip yokes have a different spline count than the 4x2 slip yokes.

Title: Re: slip yoke driveshaft question
Post by: bentparts on October 13, 2008, 03:42:19 PM

Yeah, what he said.  Thanks for pointing that out Skyhiranger, I didn't even think of that.

Title: Re: slip yoke driveshaft question
Post by: s27warner on October 15, 2008, 04:43:48 PM

thank you guys very much ... appreciate the help