ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: zuktinter on October 20, 2008, 01:26:53 PM

Title: samurai lift question
Post by: zuktinter on October 20, 2008, 01:26:53 PM

I was going  to put the 3" calmini suspention lift on my samurai  but they are on back order till the end of the year,hellcreek has some springs that give 4 1/2 inch lift so my question is if I  go with the hellcreek 4  1/2 springs will a 2 1/2 inch drop pitman arm work for the steering? thanks Mike

Title: Re: samurai lift question
Post by: Drone637 on October 20, 2008, 01:43:01 PM

It should, but at that point you might want to just look at switching to a High Steer setup from Sky Manufacturing.  You are running at pretty much the same hight as a Spring Over lift only with stiffer springs and receiving less axle wrap.  :)

Title: Re: samurai lift question
Post by: Amilla on October 21, 2008, 11:23:21 PM

Defiantly high steer!

Amilla