ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: Z71Edge on October 30, 2008, 09:53:58 AM
-
Does anybody make one? I thought I asked this before, but I dont remember...
Anyways, I was browsing around on Zukination's website and noticed at the very bottom they list a Body Lift area with a price of $149. In the article, they talk about how they don't recommend a bodylift larger than a 3" because of all the mods you need to do...but they never state whether or not if they body lift they sell is a 2" or a 3". I've tried emailing them and calling them with no luck. Anybody know if this one is a 2" or know of anybody that makes a 2"?
Look at the bottom of this page to see what Im talking about...very misleading...
http://www.zukination.com/suspension.htm
-
Yeah rocky road makes them.......... http://www.rocky-road.com/kickbodylift.html
thats were I got mine.
However I would recommend you buy it through Lowrange Offroad. http://www.lowrangeoffroad.com/kicksuspension.htm
I "personally" think Rocky Road customer service has some room for improvement.
-
Yes Lowrangs is the way to go.
-
awesome..thanks guys!
-
Yeah rocky road makes them.......... [url]http://www.rocky-road.com/kickbodylift.html[/url]
thats were I got mine.
Actually...
Sky's Offroad Design makes them... and that one too ;) www.sky-manufacturing.com
-
BDS Suspension makes a 2" kit and it comes with bumper brakets and steering shaft spacers.
Derek
-
Yeah rocky road makes them.......... [url]http://www.rocky-road.com/kickbodylift.html[/url]
thats were I got mine.
Actually...
Sky's Offroad Design makes them... and that one too ;) [url=http://www.sky-manufacturing.com]www.sky-manufacturing.com[/url]
x2. I have been running Sky's kit for about 2 years now with absolutely NO problems whatsoever. Would normally be an EASY install (my body bolts were bent so I had to hammer them straight to get them to align with the hole). I picked mine up for $109 through www.roadlessgear.com
-
If I could do it all over again I would go with a 2in. I have Calmimis 3in, and the extra inch isn't worth the way it makes your rig look. >:(Do the 2 and a slight fender trim throw on the 31s and run it. >:D
-
If I could do it all over again I would go with a 2in. I have Calmimis 3in, and the extra inch isn't worth the way it makes your rig look. >:(Do the 2 and a slight fender trim throw on the 31s and run it. >:D
Thats the plan...I want just enough clearance/trimming to run 31's on a set of 15x7 wheels...So im gonna go with a 2" BL and some of Jeff's spacers. Every place I have looked until now was only 3" BL's tho and I dont like the amount of frame they show. Run that till I can afford to run a Slayer kit.