ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: xoloski on November 12, 2008, 01:46:11 PM

Title: Tracker Torque Converter removal
Post by: xoloski on November 12, 2008, 01:46:11 PM

I want to mount a 1.6 to an engine stand but the torque converter is still attached to the flex plate by three bolts / nuts.
I tried a 3/8 drive 14mm socket and broke the socket.
What's the trick to removing the nuts / bolts to get the converter off?

Title: Re: Tracker Torque Converter removal
Post by: Armour on November 12, 2008, 04:38:44 PM

There should be no trick! Mine came out wuth no problem. I would say try again! Heat the nuts if you have to!