ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: suva on December 09, 2008, 03:04:13 PM
-
I'm removing the richmond gear lock-right out of my 'kick and I don't remember if the block that the spider gear cross shafts go through was in there before I put the locker in or if it came with the unit. Anybody know?
-
YEP
-
Good answer! LOL!
-
The more I think about it it was just the 2 washers that came with it...
-
the cross block with flat washer on each side I believe
-
Good answer ;)
(http://www.izook.com/images2/pscrosspins.jpg)
-
BTW.. Samurai shown... ALMOST same set up as Kick...
Zig
-
zig needs to clean his nails
-
zig needs to clean his nails
Sorry not me, pick courtesy of iZook, I could not find the pic on my lockrite install article...
-
Khan_Sultan had done a very detailed write up with lot's of pics on his lock-right installation. Should be able to get what you need from all of his pics...
http://www.zukiworld.com/forum/index.php?topic=22618.0
-
Khan_Sultan had done a very detailed write up with lot's of pics on his lock-right installation. Should be able to get what you need from all of his pics...
[url]http://www.zukiworld.com/forum/index.php?topic=22618.0[/url]
Cool thanks, I was looking for that and could not find it quick :P
Zig