ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: cstello on January 02, 2009, 07:33:08 AM
-
I have these on my Samurai. http://www.puresuzuki.com/u-bolt_skids.htm (http://www.puresuzuki.com/u-bolt_skids.htm) On both sides the lower shock mounts have broke. Does anyone know why this would happen and how to prevent it???
-
i think your shock is botteming out "to long"or its to much of a heavy duty shock!
-
Like Machz said, your shock is probably bottoming out. Check your travel and see if you need to extend your bump-stops or get different shocks.
Now we have bent the shock mounts when they are that low on a couple of vehicles. Everyone in the club runs the shock mounts off of the spring pads on top of the axle to keep them out of the way. You can install taller shock towers, allowing you to run the long shocks without introducing the bottom of them to the rocks.
-
i know it has nothing to do with your post .. but i'm new at this and how do you post your own question ??? i can only reply to other peoples questions ..sorry
-
Click New Topic in the main window. :)