ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: homer74 on January 06, 2009, 01:30:10 PM

Title: Transmission adapterplate.
Post by: homer74 on January 06, 2009, 01:30:10 PM

I think someone needs to post on cad ,dimensions for the tranny adapter plate, so i can start making them, the one for the 1.6 to 1.3. dimensions,thickness,etc.

Title: Re: Transmission adapterplate.
Post by: Skyhiranger on January 06, 2009, 05:11:38 PM

There is a post over on zuwharrie, in the samurai section, that has a link to a diagram that shows all the measurements and details on the adapter plate.

You can send me one, as thanks, once you start making them.  ;)

Title: Re: Transmission adapterplate.
Post by: homer74 on January 06, 2009, 06:08:34 PM

Thanks, and if i do make one and it turns out good, i will make one extra for ya.