ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: toolman21 on January 16, 2009, 08:15:00 AM

Title: Front transfer case output seal
Post by: toolman21 on January 16, 2009, 08:15:00 AM

My front seal for the driveshaft has started leaking.  Looked at the typical places and only see the seal for the rear shaft and not the transfer case front yoke.  Is it the same as the rear or does anyone have a part number handy?

As a follow up, this seal just just pry out and the new one tap in right?

Thanks

Title: Re: Front transfer case output seal
Post by: Skyhiranger on January 16, 2009, 10:14:52 AM

Yeah, they should be the same front and rear.
Just pry the old one out, press the new one in.

Title: Re: Front transfer case output seal
Post by: toolman21 on January 16, 2009, 08:22:12 PM

Ok thought so but since it was an order it type item I figured I would check first.  Thanks  8)