ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: mersingt on January 25, 2009, 07:16:57 AM

Title: advice on fitting 33s
Post by: mersingt on January 25, 2009, 07:16:57 AM

Alright ive got a 96 2 door convertible with a 3 inch bodylift and 4 door springs running 31 inch tsl radials...Im planning on getting a samurai tcase dropped in sometime in feburary and locking the rear end also  with this setup the goal is 33s I plan on purchasing ome struts and running crown vic shocks in the rear (already installed)

so for the front Im looking at a 1.5 inch spacer which should give me about 1.75 inch of lift and doing the same for the rear cause my front is droopy then of course trimming the back of the front wheel well and the rear as required...

eventually Id like to do some gv v6 coils all around or a calmini 3 inch and gear the tcase to run 35s

do you think that what I have now is sufficient?

Title: Re: advice on fitting 33s
Post by: RACER X on January 25, 2009, 09:32:53 AM

ive got 3in body lift, 2inch spacers and 4dr coils
 im running 33x12.5x15 with minior trimming on ford rims

Title: Re: advice on fitting 33s
Post by: jeff1997 on January 25, 2009, 12:22:03 PM

mersingt, I can make any size spacer from 0-2.5" that you may need. PM if interested