ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: chevycotton77 on January 28, 2009, 10:35:25 AM
-
Where i could buy the 3" clamnini BL besides from calmini..people have told me lowrange offroad but they only have the suspension lift? i really dont want to go through calmini because ive heard some bad things about their service..
-
It's a crap shoot on experiences
Personally I have never had an issue with the service
if you can live with 2" there are other body lifts
-
Where i could buy the 3" clamnini BL besides from calmini..people have told me lowrange offroad but they only have the suspension lift? i really dont want to go through calmini because ive heard some bad things about their service..
You can always make your own out of raw material. Thats what I did with metal from the local scrap yard.
-
A 2" spacer lift from Jeff will give more frame clearance, and is about $200 installed. Body lifts give no direct frame or gas-tank clearance (just what the bigger tires give ya). Have you considered fender trimming? If you cut & roll the body panel, it looks clean, and clears bigger tires without raising CG.
-
Where i could buy the 3" clamnini BL besides from calmini..people have told me lowrange offroad but they only have the suspension lift? i really dont want to go through calmini because ive heard some bad things about their service..
I have the calmini lift, do not get it, if i could do it again, to make it easier buy the boondox kit. no welding or bending required!
-
Where i could buy the 3" clamnini BL besides from calmini..people have told me lowrange offroad but they only have the suspension lift? i really dont want to go through calmini because ive heard some bad things about their service..
I have the calmini lift, do not get it, if i could do it again, to make it easier buy the boondox kit. no welding or bending required!
Ya but is boondox still in business? I ordered a 3 inch coil lift from them, and after I got it I wanted to order more stuff and havent been able to contact them for about a year now.
-
I talked with the guy from Boondox this last week. He said something about an outfit in Colorado is going to be taking over for most of the stuff starting in the next couple months.
-
you can also use hockey pucks. I've had them on my chevy. or square tubing or buy a set of body mounts and stack them with the old set
-
Try Masterkit1 out of Canada. My 3" BL came from them