ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: tracker8wr on August 24, 2004, 10:05:25 AM
-
ok i have a dana 30 a and dana 44 sitting here but there is not a close enough ring and pinion set.
tracker 5.12
5.83
dana 44 5.89
all i found for a dana 30 is 4.8? something.
oh the dana 30 fits perfect the 44 is a little to long by 4 inches total i can live with either axle.
does anyone know somewhere to get a ring and pinion made to a certain size.
-
the Dana 30 Swap is what I've been concidering myself.
However the gears, is something I was going to worry about after I had the rest resolved.
In my area we've a six states business that carries most gears, and I know is able to build a lot in house.
Another idea, contact a your local jeep guys, (gasp it's almost blastphemy) and see who thier contacts are.
-
Check out Randy's Ring and Pinion http://www.diferentials.com/
They list a 5.38:1 for the D30 and for the Samurai. The Samurai is the only Suzuki on the list but I'm sure they'd have it for the Trackick. Give them a call.
-
ok i have a dana 30 a and dana 44 sitting here but there is not a close enough ring and pinion set.
tracker 5.12
      5.83
dana 44 5.89
all i found for a dana 30 is 4.8? something.
oh the dana 30 fits perfect the 44 is a little to long by 4 inches total i can live with either axle.
does anyone know somewhere to get a ring and pinion made to a certain size.
arnt' 5.89's and 5.83's close enough? and why not just put 44's front and rear?
stu
-
yeah, I'd go with the 44's, 5.89's means taller tires!
-
Whatever you don't use, send to me ;D
-
some times i feel really spoiled. i have about 30 D44's and 9in Fords setting out back of my shop and other people have to look and swap stuff for axles. i'm thinking of building another tracker. ;D
stu
-
where do you live, and what are the 9's out of?
Brian
-
where do you live, and what are the 9's out of?
Brian
sorry but we break too many of them to sell. but most of them are out of broncos and early trucks.
stu
-
and i live in VT
-
sorry but we break too many of them to sell. but most of them are out of broncos and early trucks.
stu
Could always give me a set of axles... that's not selling them ;D
-
yes i thought of doing 2 swaps (44's) but that means i have to retube the rear bcause it is offset to much, the front is within an inch, the rear is off by 4". so more money. and if i go with OX axle shafts and stubs in the 30 they claim it will be far stronger than a dana 44.
what r the lagest size tire being WELL used on a tracker axle.
-
what r the lagest size tire being WELL used on a tracker axle.
i don't know what you mean by well used but my welded tracker rear end has 34in TSL swampers on it and i have to change axles shafts once a year atleast.
stu
-
well used running it hard and pushing to the limits.