ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: MaD.72 on March 30, 2009, 05:27:37 PM

Title: Strut mount!!
Post by: MaD.72 on March 30, 2009, 05:27:37 PM

This is what i want to do... i want to lift my sidekick 2"

For the rear i'm going to built a 2" coil spacer, and later ad some rear shock from a ford E-150 97'

For the front i'm going to built a 1,5" coil spacer, why?? because for every inch that you ad to the rear you have to raise the front 3/4" Exemple 2" for the rear equal 1,5" for the front

the think that puzzle me now is if i flip the strut mount and ad a 1/2" spacer, will the strut be long enough??

BTW i'm going to use 2"1/2 Exhaust Flange for the strut spacer

Title: Re: Strut mount!!
Post by: kubik1981 on March 30, 2009, 05:42:29 PM

get a hold of jeff1997 he builds and sells all that stuff.  It is high quality products. i as well as quite a few people on have them

Title: Re: Strut mount!!
Post by: MaD.72 on March 30, 2009, 06:21:36 PM

Thank, but the spacer is already built, the only think left to built is the strut adaptor...

Title: Re: Strut mount!!
Post by: rascott on March 30, 2009, 10:29:36 PM

i used 1/2" pvc to drop my flipped mount, and am using the stock(and original, i'm sure) struts.
i think that is near the limit of the cv joints when extended.
perhaps another 1/2" is possible.
i have not tried.