ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: cmays03 on May 18, 2009, 04:47:14 PM
-
well I'm going to make a 3" body lift for my tracker. I would like to know what you all have ran into when doing a body lift on a tracker any problems that you ran into or suggestions to make it easier to do. thanks
-
There's a good write up for a 3" bl here, should have some good answers.
http://www.zuwharrie.com/content/view/11/27/1/3/
The write up covers most of what you'll run into, you'll have to extend a few things, and relocate a few things.
Hope this helps!
-
thanks that helps a lot.
-
No problem, welcome to the site!
-
thanks I just finished making all the pieces to do the body lift. Next I have to disconnect what needs to be then ready to start the install.