ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: scottprice on May 21, 2009, 04:14:30 AM

Title: 2 Piece Hard Top Replacement Parts
Post by: scottprice on May 21, 2009, 04:14:30 AM

Hey guys! It looks like I found a good hard top I'm interested in, but it's missing the mounting brackets and spacers. Anyone know what brand this is? Most importantly, anyone know how to get my hands on those extra parts or how to fabricate something that would work? It looks like this:

http://cgi.ebay.com/ebaymotors/Geo-Tracker-Suzuki-Sidekick-Hardtop-Hard-Top-Removable_W0QQcmdZViewItemQQ_trkparmsZ66Q3a2Q7c65Q3a13Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a1Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem2301328a5aQQitemZ150343944794QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

http://cgi.ebay.com/ebaymotors/geo-tracker-suzuki-sidekick-hard-top-NO-RESERVE_W0QQcmdZViewItemQQ_trkparmsZ66Q3a2Q7c65Q3a13Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a1Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem4a9759dcb1QQitemZ320366828721QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Title: Re: 2 Piece Hard Top Replacement Parts
Post by: Swansen on May 21, 2009, 08:28:29 PM

oh man, those are the sweet ones.  .... Seriously though, i found their website like once and decided it would be easier to find them again them bookmark their site....  Anyways, no, i don't thinking fabbing up some mounts/clamps would be to difficult.

Title: Re: 2 Piece Hard Top Replacement Parts
Post by: Uncivilized on May 23, 2009, 06:19:57 PM

The front spacers are no more than 1/4" thick rubber. The rear is a little bit tricky, those "L" shaped blocks are made of plastic, but you could fabricate something out of 1/8" plate, 6" x 6" maybe. You'd need to bend it to look like this:

   |\
   |
   |
   |
   |
----

You'll be able to get the right height measurement once you get it on there, but I think it's around 3". You could even change it a bit if you like to use a bolt.