ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: IrishMike on June 02, 2009, 11:44:19 AM
-
What is the bar called underneath the rear bumper in this photo.
(http://photos2.ebizautos.com/3819/264966/264966_1.jpg)
Its the rusty bar underneath the bumper. Is there a way to remove this bar?
Thanks!
Mike
-
I believe it is there to 'protect' the gas tank in case of a rear collision. It can be removed by two bolts on each end holding it to the frame.
Zig
-
Cool, thanks a lot man.
-Mike
-
Hope your not planning to leave it off. That's the only thing between you and a flameing Pinto-style rear-ended BBQ. Rest of the rig looks great, just repaint it and put back on.
-
Mine was completly rusted off, only spot on the frame that was gone.
I cut my whole rear frame off and made it out of 1/8'' steel and 2x2 box tubing though :laugh:
Bryce
-
Hope your not planning to leave it off. That's the only thing between you and a flameing Pinto-style rear-ended BBQ. Rest of the rig looks great, just repaint it and put back on.
Yea, what he said!!! Or replace it with a Tracker tow hitch.
Zig
-
Hope your not planning to leave it off. That's the only thing between you and a flameing Pinto-style rear-ended BBQ. Rest of the rig looks great, just repaint it and put back on.
Yea, what he said!!! Or replace it with a Tracker tow hitch.
Zig
Yeah, that is what I did with mine. Reese used to make a bolt-on hitch that replaced that bar.
-
Mine was bent in the middle. I cut about 3 inches out of the middle of it and welded in a 2 inch reciever hitch that I cut off of the back of a wrecked heeps's reciever. ;)