ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: celouden on June 08, 2009, 07:12:37 PM

Title: 1.6 install
Post by: celouden on June 08, 2009, 07:12:37 PM
Ive just about got my 1.6 built, and now trying to figure out the mounting.  Of course Petro is out of the adapter kits, so Ive been looking at others.  I have SPOA, but no body lift and dont want one to clear the hood.  Have weber card and air filter.

Question:

 WHICH adapter kit works so I dont have to have a body lift?  the motor i have did not include the mounts on the block or frame, so I have 1.3 engine mounts, and stock 1.3 frame mounts.  Do I need the block brackets for the 1.6? can I use the 1.3's? Does the TT kit have everything I need using the stock 1.3 brackets and mounts?....HELP...
Title: Re: 1.6 install
Post by: 1badzuk2 on June 09, 2009, 08:40:25 PM
i just did a 8v and a 16v the 8v cleared the 16v dont my hood wont close im either goign to raise the hood a little or do a 1 inch body lift.  if you have any question let me know i just got done doing this sawy 2 days ago..