ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: jasonlemon on June 13, 2009, 05:29:03 PM

Title: Doing 1.6L 8V swap. ??s
Post by: jasonlemon on June 13, 2009, 05:29:03 PM

I have been doing my swap this weekend. Not to bad but, i just put the motor in and the motor mounts are not lining up now. There is the metal part of the motor mount and the part that has the rubber. Do I have to use both pieces off the 1.3L? I used both rubber pieces off the 1.3 and I used the 1.3 metal part for the pass side. BUT i left the metal part from the 1.6 on the driver side. I didn't think it looked different.....Maybe i was wrong.

Jason

I am using the trail tough kit.

Title: Re: Doing 1.6L 8V swap. ??s
Post by: Jeremiah on June 13, 2009, 05:48:03 PM

http://members.cox.net/aftermarket4x4/sleeper.html (http://members.cox.net/aftermarket4x4/sleeper.html)

Title: Re: Doing 1.6L 8V swap. ??s
Post by: RHodge on June 13, 2009, 07:00:04 PM

I had to oblong my holes in the mounts that bolted to the frame. It took a little work but they do fit