ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: new2zuki on July 02, 2009, 11:21:55 AM

Title: door help
Post by: new2zuki on July 02, 2009, 11:21:55 AM
so i know you have better things to do than answer stupid questions lol but i cant get my doors off  tried to un screw the braket from the out side and did nothing but strip a couple screws is there a trick or a method or am i just an idiot lol  87sami
Title: Re: door help
Post by: Drone637 on July 02, 2009, 01:28:28 PM
You had it half-way right.  Pulling the hinges off is one way to remove the doors.  You can also cut the hinges up to allow them to be quickly removed.

There is a nice writeup at http://www.off-road.com/trucks4x4/article/articleDetail.jsp?id=277589
Title: Re: door help
Post by: oak_raid on July 02, 2009, 02:04:23 PM
Get you an impact screwdriver.  I picked one up last month from harbor freight for under $7.  Makes it MUCH easier getting some of those stubborn screws off.
Title: Re: door help
Post by: freeriders98 on July 07, 2009, 02:53:20 PM
http://www.roadlessgear.com/page/RGL/PROD/T/TH28.000
Something like this should help.
Or just cut the hinges off. Pretty easy. I did it in about an hour with a dremel tool and some little cut off wheels
Title: Re: door help
Post by: Jeremiah on July 12, 2009, 10:21:37 AM
Get you an impact screwdriver.  I picked one up last month from harbor freight for under $7.  Makes it MUCH easier getting some of those stubborn screws off.

Interesting enough - I don't like my impact screwdriver  :'( It's got less torque than my screw gun.. which I can lean heavily on to make sure it doesn't strip out the screw. YMMV.