ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: explosivo on August 15, 2004, 04:29:21 AM
-
In the front, will a kick driveshaft bolt up to a Samurai axle?
-
The flanges are different in bolt spacing,
but you could use the Sammie flange on
a Kick shaft by swapping when you install
new U-joints
Wild
-
So they use the same U-joint?
That's what I'll do if I follow through with the Sammy SAS plan, then. Just another part to add to the ever-growing list :)
-
89 and newer large sami flanges are the same bolt pattern as the kick