ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: nitrolegend on July 08, 2009, 07:54:41 AM

Title: Ring and Pinion gears
Post by: nitrolegend on July 08, 2009, 07:54:41 AM
Hi can someone tell me the best place to buy ring and pinion gear sets for my 95 tracker. I want the lowest gears i can find. Thanks
Title: Re: Ring and Pinion gears
Post by: Rhinoman on July 08, 2009, 02:52:27 PM
The options are pretty limited. I believe that there is a company in Turkey that sells 5:83s. If you have an auto then you can use the gears from the manual (5:12s). 5:38s and 5:63s were fitted for very brief periods to particular models.
Title: Re: Ring and Pinion gears
Post by: cmays03 on July 08, 2009, 06:39:16 PM
what are you doing with the tracker? u have a few options. if you cant find anything lower than 5.13 then you can get a tcase reduction kit 4.24:1 I have it and 5.13 gears in the axles awesome low end but dont have any speed but i can do anything I want with it.
Title: Re: Ring and Pinion gears
Post by: zukimoo on July 08, 2009, 06:41:32 PM
If you got the money get the t-case gears....it will give you a reduction on high range with lots on low range...this will make is possible to drive down the road at a good speed. I'm running 512 in the 413K and it can't go very fast.
Title: Re: Ring and Pinion gears
Post by: Armour on July 08, 2009, 08:21:54 PM
T case gears for a trackick don't give you high range reduction! Only low range. But they do have a reduction box available now. Just not very cheap!
Title: Re: Ring and Pinion gears
Post by: zukimoo on July 08, 2009, 09:58:17 PM
Driving around very slow gets real old fast....when I drive the Lj it's so slow to get around and the 413K is just as slow. You end up getting there and it's only a few minutes more but it looks so slow when you are getting around at 70km/h.

I'm going to spend the money on some mild t-case gears and then swap to 462's. I want highway and slow speed in the trails. We don't have rocks here so it's not an issue.
Title: Re: Ring and Pinion gears
Post by: Skyhiranger on July 09, 2009, 08:05:15 AM
Hi can someone tell me the best place to buy ring and pinion gear sets for my 95 tracker. I want the lowest gears i can find. Thanks

I just listed some 5.38 and 5.62 complete thirds in the for sale section.  They will bolt right in and lower both high and low range.