ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: Ira88888 on July 26, 2009, 08:11:41 AM

Title: 95 Track 2-door handles
Post by: Ira88888 on July 26, 2009, 08:11:41 AM

Well, two years ago I bought replacement handles just for this very day--my driver's side snapped off in my hand.

Can I just screw out the old assembly and screw in the new? Do I have to remove the door panels? Is this complicated?

I have a million errands to do today, and don't want to start this if I'm looking at a PITA project.

Thanks!

Title: Re: 95 Track 2-door handles
Post by: xkmail on July 27, 2009, 09:59:52 PM

You can just unscrew the handle and not the door as long as you can reach the wire lever that connects from the handle to the door.
Sometimes putting on the little plastic clip holder on the wire lever is easier if you pull the door panel.
i found them on ebay maybe $10

Title: Re: 95 Track 2-door handles
Post by: Jeremiah on July 29, 2009, 05:10:02 PM

It's a 5 min job at most + one phillips screwdriver. The plastic bit that connects to the metal rod (you'll see) can be a PITA to get back onto the replacement. Just take your time, and keep your Chi centered.

Title: Re: 95 Track 2-door handles
Post by: Lindenmooch on July 29, 2009, 05:12:50 PM

my chi is all messed up right now....   =/